Maintenance Precautions for Poultry Slaughtering Machine

Categories:Industry news
Author:
Origin:
Time of issue:2022-12-07
Views:0

(Summary description)The maintenance of Poultry Slaughtering machine equipment is very important to the production of slaughtering lines. Poultry slaughter lines go through some normal wear and tear during production.

customized Poultry Slaughtering machine Wholesale Price

Wholesale Poultry Slaughtering machine supplier(s) china





Maintenance Precautions for Poultry Slaughtering Machine

Categories:Industry news
Author:
Origin:
Time of issue:2022-12-07
Views:0

Information

The maintenance of Poultry Slaughtering machine equipment is very important to the production of slaughtering lines. Poultry slaughter lines go through some normal wear and tear during production. Therefore, maintenance is particularly critical. The following are the parts maintenance methods of the Poultry Slaughtering machine:

Discount Poultry Slaughtering machine from China manufacturer
1. Maintenance method of machine head motor:
The slaughtering line must not allow the motor to enter the water, the Poultry Slaughtering machine manufacturer tells you that this may cause damage to the motor and affect its use. It will also shorten the service life of the slaughtering equipment.
2. Chain maintenance method:
The chain of the slaughtering line may cause the original lubricating oil to heat and volatilize after long-term operation, which will easily cause the chain of the slaughtering line to be unbalanced during operation, increase noise, and crawl. Add butter or a thicker lube, etc. to the chain.
3. The repair and maintenance method of the reduction box of the head of the slaughtering line:
Drain the engine oil in the reduction box about three months after starting to use it, clean the inside of the reduction box with diesel or gasoline, and add new lubricating oil to the middle of the observation window immediately after draining it. After that, just change the lubricating oil every year. The Poultry Slaughtering machine manufacturer tells you that too much lubricating oil may cause the gearbox to heat up, and the motor protection switch may trip due to excessive motor load. Too little lubricating oil may cause the reduction box to heat up, increase the noise and cause the reduction box to hang and be scrapped.